EliteRAID ER316UT+B - 3U 16 Bay SATA to USB eSATA Hardware RAID 6 Rackmount

EliteRAID ER316UT+B - 3U 16 Bay SATA to USB eSATA Hardware RAID 6 Rackmount
EliteRAID ER316UT+B - 3U 16 Bay SATA to USB eSATA Hardware RAID 6 Rackmount
Item# ST-SAN-ER316UTplusB

The EliteRAID ER316UT+B is a 3U 16-bay rackmount with USB 2.0 / eSATA interfaces (up to 200MB/s), and embedded hardware RAID 6 engine. The hardware RAID feature offloads complex RAID calculations from the client's operating system to the RAID engine, which increases the overall read/write performance and eliminates OS compatibility issues. The built-in Web GUI management interface and event notification with SMTP E-mail and SNMP trap allow administrators to monitor unit status remotely via web browser without the need for additional software. In addition to RAID 5, Mirroring (RAID 1) and Striping (RAID 0), the ER316UT+B also supports RAID 6 to protect stored data against up to two hard drive failures. JBOD is supported via port multiplier and allows drives to be accessed individually. Utilizing both SATA drive interfaces, the ER316UT+B is guaranteed to achieve the high performance with fail-safe file protection.

Note: Please allow 3 days for rackmount testing before shipment.
  • Dedicated RAID engines I/O processor.
  • Hardware RAID to eliminate OS compatibility and increase overall performance.
  • Supports RAID 0, 1, 1+0, 3, 5, 6, JBOD with hot spare disk.
  • USB 2.0 and eSATA interfaces; providing up to 200MB/s in performance.
  • Supports the latest 3TB hard drives; up to 48TB in a single volume.
  • Over 2TB volume supported.
  • Supports online RAID migration and online storage RAID capacity expansion to eliminate access downtime.
  • Up to 8 different RAID volumes.
  • Built-in HTTP web GUI management. No additional software required.
  • Event notification via E-mail and SNMP trap.
  • Serial port and LCD management is provided when HTTP web GUI is unavailable.
  • Built-in redundant power supply for protection against power supply failure.
 Model  ER316UT+B
 Form Factor  3U Rackmount
 HDD Trays  16 Hot-Swappable 3.5"
 RAID Level  0, 1, 1+0, 3, 5, 6, JBOD
 Maximum Capacity  48TB
 Maximum RAID Volumes  2
 Auto Rebuilding  Yes
 Hot-Spare  Yes
 Host Interface & Transfer Rate  USB 2.0 & eSATA
 Drive Interface  SATA
 Cooling Fan  4" Cooling fan * 2, 1.5" Cooling fan * 3 from Power Supply
 Power Supply  Redundant 650W Power Supply * 3
 Controller Interface  Web-based management, Serial Port or LCD
 Status Indicators  Hard Drive & Failure LEDs
 Dimension (in)  5.25 H x 19 W x 23 D
 Weight (lb)  46.0
 Safety Regulations  CE, FCC, UL, RoHS
 Limited Warranty  3 Years
 Model  ER316UT+B  ER316UT+B8E  ER316UT+B16E  ER316UT+B32E  ER316UT+B48E
 Hard Drive  No HDD
 SATA * 16

 SATA *16

 SATA *16
 SATA *16
 Total Storage Size  N/A  8TB  16TB  32TB  48TB

Note: Please allow 3 days for hard drive installation and testing.

Note: All hard drive bundles are pre-installed and tested before shipment. Hard drives are then packaged individually to avoid damage during shipping.